水利工程BIM技术(黄河水利职业技术学院)mooc慕课答案2026年版满分测试WYC

对应课程:点击查看
起止时间:2020-05-24到2020-06-07
更新状态:已完结

软件熟悉操作 软件基本操作测试

1、 Revit软件绘图界面有两个常用的工具条，分别是属性和项目浏览器工具条。There are two commonly used toolbars in Revit software drawing interface, which are properties and project browser toolbars.

A:正确
B:错误
答案: 正确

2、 Revit的绘图背景颜色是不能改变的。One cannot change the color of its background.

A:正确
B:错误
答案: 错误

3、 Revit软件能够设置保存的备份数。One can set the number of backups saved.

A:正确
B:错误
答案: 正确

4、 Revit 软件能够进行快捷键的自定义。One can customize shortcut keys.

A:正确
B:错误
答案: 正确

5、 新创建的标高可以通过菜单视图-平面视图-楼层平面，实现将新建标高复制到楼层平面中。One can conduct the commands to copy the elevations in the floor plans. The steps are cliking the view menu and finding out plan to choose floor plan .

A:正确
B:错误
答案: 正确

6、 轴线两侧的数字编码是不能改变的。One cannot change the numerical coding of axis.

A:正确
B:错误
答案: 错误

7、 在某一层平面图中绘制轴网，只需要影响到其它平面图中即可，不需要再绘制。When drawing a grid in a floor plan, you only need to apply to other plans, and you don’t need to draw any more.

A:正确
B:错误
答案: 正确

8、 Revit能够通过过滤器来来筛选对象。One can select and sift objects with the help of the command of filter

A:正确
B:错误
答案: 正确

9、 轴网标注可以采用与轴网相同的方法复制到其它平面图中。One can choose the same method as the grid to copying dimensions.

A:正确
B:错误
答案: 错误

10、 轴线不能多个复制，只能单个复制。One only can copy axis one by one and cannot realize multiple times.

A:正确
B:错误
答案: 错误

简单房屋绘制 简单房屋绘制单元测试

1、 绘制墙体需要设定墙的底部和顶部约束标高。One needs to set up base and top constraints of level while making model of wall.

A:正确
B:错误
答案: 正确

2、 墙体的厚度、材质等可以在属性工具条的编辑类型中修改。One can modify the thickness and material of the wall in the tool of TYPE PROPERTIES.

A:正确
B:错误
答案: 正确

3、 墙只能在设定的底部和顶部约束标高绘制，不能偏移。 The wall only can make between the base and top constraints and cannot offset.（判断2 分）

A:正确
B:错误
答案: 错误

4、 放置墙体时，可以选择墙体不同对正方式。One can choose several location lines while placing wall.

A:正确
B:错误
答案: 正确

5、 窗户的宽度、高度等可以在属性工具条的编辑类型中修改。One can modify the width and height of window in the tool of TYPE PROPERTIES.

A:正确
B:错误
答案: 正确

6、 可以利用载入族的方法，调用不同类型的窗户和门。One can load family of window and door to apply to the engineering drawing.

A:正确
B:错误
答案: 正确

7、 门窗只能绘制在实体的墙上，没有墙无法放置门窗。 One can click on wall to place window or door.

A:正确
B:错误
答案: 正确

8、 楼板是从设定标高向下布置的。The floor is offset downward from the level on which it is created.

A:正确
B:错误
答案: 正确

9、 建筑菜单中的柱子可以给建筑物放置垂直方向的柱子。The command of COLUMU can add a vertial load-bearing element to the building model.

A:正确
B:错误
答案: 正确

10、 完成轴网与柱子绘制后再绘制梁。Add grids and columns before adding beams.

A:正确
B:错误
答案: 正确

水工建筑物常见曲面 扭曲面绘制单元测试

1、 扭曲面建模采用了内建模型的方式建模。We choose the model in place mode to make the twisted section.

A:正确
B:错误
答案: 正确

2、 内建模型选择是常规模型进行建模。One can select the generic models to finish the twisted section in the Family Category and Parameters dialogue

A:正确
B:错误
答案: 正确

3、 常规模型创建模型时，采用了融合模式进行扭曲面的建模。One needs to select the Blend mode during making model of the twisted section.

A:正确
B:错误
答案: 正确

4、 渠道段建模采用了拉伸方式建模。One can choose the Extrusion mode to make the model of the channel segment.

A:正确
B:错误
答案: 正确

5、 建模时需要选择工作面。One needs to set the work plane before making model.

A:正确
B:错误
答案: 正确

6、 扭曲面段建模时，可以选择西立面或者东立面作为工作面。One can set the EAST or the WEST as the work plan during creating the twisted model.

A:正确
B:错误
答案: 正确

7、 扭曲面段建模时，采取了绘制一半然后镜像的方法。One can create the half of the twisted model and then mirror it .

A:正确
B:错误
答案: 正确

8、 扭曲面段镜像后，两部分能够采用连接几何图形把两个图元连接。One can make the two parts of the twisted model join with the command of JOIN GEOMETRY.

A:正确
B:错误
答案: 正确

9、 扭曲面段建模完成后，不能进行修改。One can not modify the twisted model after it was done.

A:正确
B:错误
答案: 错误

10、 内建模型无法进行材质赋予。One can not set the material to the model of made by the mode of MODEL IN-PLACE.

A:正确
B:错误