Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC

对应课程:点击查看
起止时间:2020-12-21到2021-03-15
更新状态:已完结

Chapter 1 The basic knowledge of projection theory Week 1 Unit test

1、 What is the correct alignment of the three views of the third angle projection

A:The top view is directly above the front view
B:The top view is directly to the right of the front view
C:The top view is directly below the front view
D:The top view is directly to the left of the front view
答案: The top view is directly above the front view

2、 What is the correct alignment of the three views of the first angular projection

A:The left view is directly to the left of the main view
B:The left view is directly to the right of the main view
C:The left view is directly below the main view
D:The left view is directly above the main view
答案: The left view is directly to the right of the main view

3、 What kind of projection does elevation projection belong to

A:One side oblique projection
B:Polyhedral oblique projection
C:multiple-plane projection
D:Unilateral orthographic projection
答案: Unilateral orthographic projection

4、 What is the correct alignment of the three views of the first angular projection

A:The top view is directly to the left of the front view
B:The top view is to the right of the front view
C:The top view is directly below the front view
D:The top view is directly above the front view
答案: The top view is directly below the front view

5、 Which of the following are the basic properties of parallel projectio

A:similarity
B:Parallelism
C:accumulation
D:reality
答案: similarity;
Parallelism;
accumulation;
reality

6、 In the three views of the first angular projection, which corresponding relationship between the view and the object orientation is correct

A:In the top view, the side away from the main view is in front of the object
B:In the top view, the side away from the main view is behind the object
C:In the left view, the side away from the main view is in front of the object
D:In the left view, the side away from the main view is behind the object
答案: In the top view, the side away from the main view is in front of the object;
In the left view, the side away from the main view is in front of the object

7、 What is the correct relationship between view and object orientation in three views

A:The left view reflects the left, right, up and down of the solid
B:The left view reflects the front, back, up and down of the solid
C:The top view shows the top, bottom, left and right of the solid
D:The top view shows the front, back, left and right of the solid
答案: The left view reflects the front, back, up and down of the solid;
The top view shows the front, back, left and right of the solid

8、 In the third angle projection of the three views, which corresponding relationships between the view and the object orientation are correct

A:In the right view, the side away from the front view is the back of the solid
B:In the right view, the side away from the front view is the front of the solid
C:In the top view, the side away from the front view is the front of the solid
D:In the top view, the side away from the front view is the back of the solid
答案: In the right view, the side away from the front view is the back of the solid;
In the top view, the side away from the front view is the back of the solid

Chapter 2 Point, Line, Plane Week 2 Unit test

1、 Given the coordinates of C (0, 0, 10), the correct projection of C is

A:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第1张
B:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第2张
C:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第3张
D:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第4张
答案: Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第2张

2、 What is the correct projection of the following A and B?

A:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第6张
B:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第7张
C:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第8张
D:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第9张
答案: Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第8张

3、 If the coordinates of the point are known as (10, 20, 30), the position of the point is

A:30 from H-plane
B:20 from H-plane
C:10 from V-plane
D:30 from W-plane
答案: 30 from H-plane

4、 It is known that among the four points A (30, 20, 15), B (40, 20, 15), C (30, 20, 10) and D (40, 10, 15), Which two points have the same projection on the W-plane?

A:Point A and point B (point A is not visible)
B:Point C and point D (point D is not visible)
C:Point A and point B (point B is not visible)
D:Point B and point D (point B is not visible)
答案: Point A and point B (point A is not visible)

5、 It is known that A (50, 40, 15), B (20, 45, 30) and C (45, 15, 37),please sort the positions of the 3 points from back to front.

A:C、A、B
B:A、B、C
C:B、C、A
D:C、B、A
答案: C、A、B

6、 Given the point A (20, 25, 30), point B and point A are symmetric with respect to the V-plane. What are the coordinates of point B?

A:(20,-25,30)
B:(20,25,-30)
C:(-20,25,30)
D:(-20,-25,-30)
答案: (20,-25,30)

7、 Given point A (25, 20, 45) and point B (30, 30, 35), the relative positions of these two points should be

A:Point A is on the right, back and top of point B
B:Point A is on the right, front and bottom of point B
C:Point B is on the left, front and top of point A
D:Point A is on the left, back and top of point B
答案: Point A is on the right, back and top of point B

8、 Given points c (10, 0, 5) and D (10, 8, 5), the relative positions of these two points should be

A:Point D is in front of point C
B:Point C is in front of point D
C:Point D is to the right of point C
D:Point D is above point C
答案: Point D is in front of point C

9、 The name of line AB should beDescriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第11张

A:W-perpendicular line
B:Line parallel to V-plane
C:Line parallel to H-plane
D:Line parallel to W-plane
答案: W-perpendicular line

10、 The name of the line CD should beDescriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第12张

A:H-perpendicular line
B:Line parallel to V-plane
C:Line parallel to H-plane
D:Line parallel to W-plane
答案: H-perpendicular line

11、 Which of the following statements is correct?Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第13张

A:AB is the line parallel to H-plane, CD is the line parallel to V-plane, EF is the line parallel to W-plane, GH is the W-perpendicular line
B:AB is the line parallel to H-plane, CD is the line parallel to V-plane, EF is the line parallel to V-plane, GH is the line parallel to H-plane
C:AB is the line parallel to V-plane, CD is the line parallel to H-plane, EF is the line parallel to V-plane, GH is the line parallel to V-plane
D:AB is the line parallel to H-plane, CD is the line parallel to H-plane, EF is the line parallel to V-plane, GH is the W-perpendicular line
答案: AB is the line parallel to H-plane, CD is the line parallel to V-plane, EF is the line parallel to W-plane, GH is the W-perpendicular line

12、 13. Draw a line parallel to H-plane from point A to the front left. The length of the line is 10 mm, β= 30°. Which of the following is correct?

A:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第14张
B:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第15张
C:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第16张
D:Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第17张
答案: Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第16张

13、 How many planes perpendicular to horizontal plane can be made including the line parallel to H-plane?

A:Countless
B:1
C:2
D:3
答案: 1

14、 The edge of the line reflecting the maximum slope to the H-plane in the projection isDescriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第19张

A:AB
B:AC
C:BC
D:none

       


注:此答案尚未制作完成,如需购买,可点击下方红字提交表单联系客服更新,更新后可直接在本网页购买答案

点击这里,联系客服更新


为了方便下次阅读,建议在浏览器添加书签收藏本网页

添加书签方法:

1.电脑按键盘的Ctrl键+D键即可收藏本网页

2.手机浏览器可以添加书签收藏本网页

Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第20张

Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第21张


获取更多MOOC答案,欢迎在浏览器访问我们的网站:http://mooc.mengmianren.com

Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第22张

Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第23张

注:请切换至英文输入法输入域名,如果没有成功进入网站,请输入完整域名:http://mooc.mengmianren.com/


我们的公众号

打开手机微信,扫一扫下方二维码,关注微信公众号:萌面人APP

本公众号可查看各种网课答案,还可免费查看大学教材答案

点击这里,可查看公众号功能介绍

Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第24张


一键领取淘宝,天猫,京东,拼多多无门槛优惠券,让您购物省省省,点击这里,了解详情


干饭人福利,饿了么红包每日领 

Descriptive Geometry and Engineering Drawing(Northwest A&F University)中国大学MOOC答案2024完整版WYC第25张

点击这里,领取饿了么外卖红包